Roof Vent 12 in Exhaust Cap Attic Ventilation Air Supply Moisture Heat Aluminum

Description

Roof Vent 12 in Exhaust Cap Attic Ventilation Air Supply Moisture Heat Aluminum
Aluminum roof vent best for low slope or flat roof ventilation
Can be used as both air intake or exhaust
UL Certified & tested to withstand wind pressure speeds 200+ mph
Active Ventilation Products Keepa vent will alleviate moisture in the winter and heat in the summer to extend the life of the roof and building structure. The Keepa vent is best used for flat roof attic spaces as an exhaust roof vent or fresh air supply intake roof vent. Made of corrosion resistant aluminum, the Keepa vent has a round concentric vent cap and standard 11 in. collar height, square flange and an inner louver wildlife guard. The vent cap is a manufactured one piece spun round aluminum cap that prevents rain and snow from entering the vent. The vent cap is removable to allow access for an easy rubber boot installation for membrane roofs. The 11 in. standard collar is excellent for locations that accumulate high levels of snow falls and the round design is aerodynamic to with stand wind speeds up to 200 mph. The Keepa vent has proven to be an excellent and economical choice for a flat roof application.
Best used for flat roof attic ventilation
Model KV-12 has aluminum 18 in. x 18 in. flat square flange
3 in. flashing
Net free air space: 113 sq. in. (0.78 sq. ft.)
Pitch capacity range: 0/12 to 12/12
Ventilation rule 1:300: One vent per 450 sq. ft.
Built-in inner vertical louver cylinder that keeps out insects, birds, and animals while allowing air to move through the vent without resistance
Built-in inner vertical louver cylinder has a 1/8th in. opening between the louver blades and all aluminum ("noncombustible") material meets the requirements of California building code 706A.2 vents to resist the intrusion of burning embers and flame through ventilation openings
Color Family
Silver
Color/Finish
Aluminum
Features
Corrosion Resistant,Paintable,UV Resistant,Weather Resistant,Wildlife Guard
Intake/Exhaust
Intake/Exhaust
Material
Aluminum
Mounting Position
Roof Mount
Pack Size
1
Paintable/Stainable
Yes
Power Type
Non-Powered
Product Weight (lb)
4.5
Screen Included
Yes
Shape
Round Top
UV Resistant
Yes
Cut-Out Width (in)
12 in
Net-Free Area (Sq In)
113
Product Depth (in)
18
Product Height (in)
15
Product Width (in)
18
Shipping
Fast shipping is very important for us.
Our standard US shipping service is FREE.
Your order will usually be shipped within 3-5 business days upon full payment received.
Your order will usually be delivered within 5-14 business days after the handling time.
**Note: Handling and shipping times are usually much faster than stated above, but due to shortages of materials and workers shipping on some items may take more time.**
We do not ship to PO address. We reserve the right to cancel any order for any reason at any time.
We are not responsible for undeliverable addresses.
Returns and payment
Note: No returns are available on items shipped outside of the USA.
FeedBack
Your feedback very important to us, after you get your package and you are
satisfied with our service please leave us positive feedback
If you have any problem with your order / any questions, please contact us before leaving any type of feedback.
For any questions, use eBay's contact system
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.