Air Flow Research 1006 195cc Angled Enforcer Cylinder Head - Assembled NEW

Description

Fitment and Product Information
195cc Angled Enforcer Cylinder Head - Assembled, For Chevy Small Block
Brandname:
Air Flow Research
Part Number:
1006
Description:
AFR's 195cc SBC Enforcer Cylinder heads feature our Permanent Mold “As-Cast” Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. This budget friendly head is perfect for your 350 to 400 Cubic Inch operating below 6000 RPM.
They come fully assembled with the identical components found in our higher end CNC ported cylinder heads; such as ARP rockers studs, PAC Racing springs, viton valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring cups our one piece 8mm 21 4N Stainless Steel valves. They are available in straight or angle plug and bare without any parts for the DIY. Sold as a single piece, 2 are required per engine.
Specification:
Material:
A356 Aluminum
Intake Port Volume:
195cc
Intake Port Dimension:
2.080" H x 1.270" x 5/16 Radius
Intake Port Location:
Stock
Exhaust Port Volume:
76cc
Exhaust Port Dimension:
1.380" H x 1.420" W
Exhaust Port Location:
Stock
Combustion Chamber Size:
64cc
Valve Cover Bolt Pattern:
Perimeter Bolt
Valve Angle:
23°
Valve Spring Pocket Diameter:
1.580" O.D
Max Valve Spring Pocket Machining:
1.600" O.D
Deck Thickness:
.450"
Minimum Bore Diameter:
4.000"
Flat Mill:
.006" per cc 56cc Maximum
Spark Plug Dimensions:
14mm x .750" w/Gasket Seat
WARNING
: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov