-40%

110V 30MPa Electric Air Compressor Pump PCP 300BAR 4500PSI Auto Shut YONG HENG

$ 143.61

Availability: 47 in stock
  • Working Pressure: 100-300BAR,1500- 4500PSI
  • Lubricating oil: ISO VG46 or AW 46
  • Brand: YONG HENG
  • Refund will be given as: Money Back
  • Condition: New
  • Lubrication Mode: Splash Type
  • Compression Stage: Two Stage
  • Shout down: Manual stop/automatic stop(for optional)
  • Filtration: Water/oil separator
  • MPN: RS-32
  • Model: YH-QB01
  • Size: 36 X 18 X 37CM
  • Restocking Fee: No
  • Motor Power: 1.8KW
  • Return shipping will be paid by: Seller
  • Pressure indicate: Gauge
  • Type: High Pressure
  • Cooling System: Water Cooling
  • Air hose connection: 8mm quick connect fitting
  • Noise: MAX 78DB
  • Country/Region of Manufacture: China
  • Air flow rate: 40-50L/MIN, 1.5-1.8CFM
  • Inflating Speed: 2800R/Min
  • Material of Cover: Cast Aluminum
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Power: 110V 60HZ
  • Warranty: Lifetime
  • Battery: LR44
  • Charge pressure: 30MPA

    Description

    Description
    YongHeng 30Mpa electric pump can be used for fire fighting, air soft, paintball, leakage detecting, pressure-tight test, automobile tyres, etc.
    Operation instruction:
    1. Take out the product; install the hose at the air outlet.(Note: gasket is needed, or air leakage might exist.)
    2. Connect 2 cold water pipes and connect them to the water pump. (Note: the lower pipe connected to the water pump is water inlet; sinking pump is used in this product. The water pump should be immersed in water for using.)
    3. Install the pressure relief valve screw; pressure relief valve screw is installed at the pressure relief hole under the hose.The blow-down valve is installed at the
    drain outlet of the first air chamber block.
    4. Immerse the water pump in water and switch on the power.
    5. Connect the container need to be inflated, make sure the connection is correct.
    6. Screw up the screws of the blow-down valve and pressure relief valve.
    7. Switch on the power ant the machine operates. Note: when the machine is operating, the water must operate correspondingly, or the product might be damaged due to overheated, personal harm may even occur.
    8. After the inflation is completed, screw of the pressure relief valve should be firstly loosen, then the power is to be switched off, by doing so, high pressure
    air backlash caused due to sudden failure of power supply would be avoided, which could lengthen lifetime of the product, as well as discharge high pressure air in the machine.
    Warning:
    1. Please use the power supply according to the parameter table.
    2. If abnormal noise occurred during the using of the product, please stop using it instantly and check the cause.
    3. The product should be placed at a place that it couldn’ t be touched by children.
    4. Please do not use it in moist and flammable place.
    5. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed.
    6. Make sure the socket could withstand a currentgreater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket.
    7. Please do not touch the head section after the machine was just being used, so as to not beburnt by high temperature.
    8. Please do not leave without authorized, or the product might be damaged by increasingly rising pressure, sustained overload motor, even halt due to the operation pressure has reached but it is not turned off timely.
    9. When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder
    temperature could be better controlled.
    10. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time.
    Specification
    Model : YH-QB01
    Power Rating : 1.8KW
    Inflating Speed : 2800R/Min
    Noise : MAX 85DB
    Air Flow Rate : 40-50L/MIN; 1.5-1.8CFM
    Working Pressure : 100-300BAR; 1500-4500PSI
    Cooling System : Water Cooling
    Compression Stage : Two Stage
    Lubrication Mode : Splash Type
    Material of Cover : Cast Aluminum
    Shout down : Manual stop/automatic stop(for optional)
    Pressure indicate : Gauge
    Filtration : Water/oil separator
    Lubricating oil : ISO VG46 or AW 46
    Air hose connection : 8mm quick connect fitting
    In The Box
    1PC   x   30Mpa Electric Compressor Pump
    1PC   x   Water Pump
    1PCS   x   Water Pipe
    1PC   x   Hose Female
    1PC   x   Air Cock
    2Pcs   x   Pressure relief screw
    1PC   x   Wearing Parts
    1PC   x   English Manual
    Features
    The product has you anticipated outstanding quality and convenience.
    The product is equipped with high pressure rubber hose, to apply to multipurpose use.
    Superimposed double-cylinder two-stage compression used by this product has the feature of large displacement, quick air inflation, which could be not only used for diving fire cylinder, but also could be used in car, lorry, truck and other automobiles.
    One machine serves several purpose, with a wide application range. A universal fast connection and charging connector is accompanied with the machine, in addition to inflation bottle, it could also be used for cars, motorbike, electric vehicles and other vehicles. Range of application For fire fighting, diving, leakage detecting, pressure-tight test, automobiles, etc.
    The pressure value can be set arbitrarily, and it will stop automatically when it reaches the set pressure
    Delivery
    We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them according to your location, and only to eBay ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product.
    SHIPPING
    1. We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them, and only to eBay ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product.
    2. It is beyond our ability to change the address after we ship your item.
    3. Orders placed at weekend will be shipped within 2 days.
    4. USPS: 3-9 business days. | UPS: 2-6 business days. | FedEx: 2-6 business days.
    5. We only ship to the 48 states, and we do not ship to FPO or APO addresses.
    RETURN
    We accept returns. Please contact our customer service team immediately if: 1.You changed your mind and wish to request a return.
    2.Your product was damaged during transit.
    All returns must be directed through Customer Service. Please do not return or post items before obtaining instructions from us. If you do, there is a risk that your returned item may not be identifiable and accepted. Applicable freight fees and a 10% re-stocking fee will be deducted from your refund in cases where you changed your mind about your purchase and wish to return the product. This also applies to orders cancelled while in transit.
    We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
    We will require a picture of the damaged part for verification.
    The buyer will be liable for the shipping costs associated with warranty claim.
    WARRANTY
    For your peace of mind, this product comes with a 2-year warranty. We value our customers and wish to make your purchase experience as enjoyable as possible. If something goes wrong with your product, please do not hesitate to contact us for assistance.
    Please contact us through eBay and include the original purchase information (i.e. your name , address, email and purchase receipt number).
    PAYMENT
    We accept Paypal payment only.
    Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
    On Apr-13-21 at 02:00:06 PDT, seller added the following information: